Avec l’Aastra 800 vous bénéficierez de toutes les fonctionnalités que vous êtes en droit d’attendre d’un système de communications.
La configuration se fait confortablement grâce à une interface d'administration centralisée intuitive, directement dans le navigateur web, et fonctionne comme cela est habituel dans les réseaux de PC: créer un utilisateur, attribuer des autorisations, définir des accès au réseau de communication – rien de plus. L’administration des droits se fait de façon souple via groupes d’utilisateurs.
Comparé aux autres solutions open source, la force de ce système est aussi la fiabilité du constructeur. Les clients et partenaires Aastra bénificent d'un support porfessionnel renforcé par la R&D.
Aastra 800 Starter Kit
Le kit de démarrage Aastra 800 (Starter Kit) permet d'utiliser respectivement trois téléphones système Aastra 6770ip, téléphones SIP Aastra 6700i et téléphones SIP d'autres fabricants. L'étendue de la livraison comprend l'utilisation de quatre SIP Trunks et les licences pour OpenCTI 50 et OpenVoice 210 L.
-En savoir plus
Connection licenses for individual needs
Every company has different communication system requirements. To meet the scalability need, a licensing model is necessary for activation the external lines (SIP, S0, S2M) and phones that are actually used. If further IP lines or IP subscribers are needed, this is possible through ad ditional activation keys.
Available licenses for:
External lines
All these licenses are additional. The number of lines that are available increases with each activation of additional licenses.
- Aastra 800 CAPI
A S0 connection can be used from each CAPI-based ISDN card installed on the PC, and a license is required for this.
- Aastra 800 BRI
There is optimum integration in Aastra 800 when a PCI/PCIe card from Sangoma is used to connect to the ISDN. A license is required for each S0 interface (systems or multi-point interface).
- Aastra 800 PRI
Both the license and Sangoma PCI/PCIe card, must be installed on the PC when a primary rate access (S2M) is used.
- OpenLine SIP 2
The OpenLine SIP 2 license activates two IP phone connections (SIP-Trunks) via SIP.
Internal subscriber
All these licenses are additional. The number of phones being used at the same time increases each time a new license is activated.
- OpenAccess 677xip
To use Aastra 6770ip IP phones a corresponding number of licenses is required. Available for 1, 10, 20, and 50 phones.
- OpenAccess 675xi
This license is required for the Aastra SIP phones – Aastra 6700i. Available for 1, 10, 20, and 50 phones.
- OpenAccess SIP 101
License to use SIP phones from thirdparty manufacturers on Aastra 800 this particular license is required. It allows other SIP phones to be configured.
- OpenSoftphone 100
In order to use Aastra 2770ip, an appropriate number of OpenSoftPhone 100 and OpenAccess 677xip licenses must be activated. OpenSoftPhone 100 licenses are available in increments of 2, 4, 8 and 16 and can be combined up to a maximum of 200 licenses.
- Aastra 800 FXS
If Aastra 800 has to support an analogue terminal, a license is required for each connection, and a PCI/PCIe card from Sangoma must be installed.
Additional connection licenses
- Aastra 800 G.729
A high data compression is essential to use the available data line bandwidth for a large number of connections. Unlike codec G.711, G.729 only requires a quarter of the bandwidth. A license is required for each voice channel.
- OpenLine Q.SIG-IP 1
QSIG over IP allows communications systems at remote sites to be networked over IP routes. A license is required for each end (networking between several Aastra 800 systems or with OpenCom 100 and 1000).
- OpenAccess Mobile Client
License for integrating a mobile phone into Aastra 800. For more information about Fixed Mobile Convergence (FMC).
